TAG Heuer Aquaracer 300M Dive Watch With 43mm Steel Bezel Replica New for 2016

We checked out the blue dial version, close-up, back in March, at Baselworld.
New for 2016, are two 43 mm diameter stainless steel Aquaracers (black or blue dial), with stainless steel bezels. The replica TAG Heuer Aquaracer 300M comes in 41 mm and 43 mm diameter automatic models (in steel or titanium) – with either a ceramic or steel bezel. But if you don’t want the typical sporty two-tone diver’s replica watch look, this is a good alternative. Moreover, the bezel will scratch easier than a ceramic bezel. The dive scale numerals are engraved and then filled with blue or black lacquer, depending on which dial you choose. There is a white lume-filled dot at 12 o’clock, marking zero. Distinguished by its steel rotating bezel, this Aquaracer presents differently than two-tone bezels dive replica watches (from TAG Heuer mens replica and other manufacturers), as the steel bezel matches the steel case, instead of contrasting. Notably, the bezel is both brushed and polished, the flanks are polished – while the rest of the case, is brushed.

TAG-Heuer-Aquaracer-300M-443mm-steel-bezel-angled-thumb-660xauto-29875.jpg
And if the steel bezel is not for you, pay a little more and get one of the ceramic bezel Aquaracers. If you are looking for an ISO 6425 diver’s replica watch from one of the big names in watchmaking but don’t want to pay five grand plus, this is one of the best options.

The outer chapter ring has white printed graduations that indicate seconds/minutes in conjunction with the seconds and minutes hands, respectively. Big baton-shaped, polished and facetted, luminescent hands indicate the hours and minutes. A polished seconds hand, with a yellow tip with lume, continuously sweeps the dial. An angled date aperture with a magnifying lens overtop is positioned at 3.

The dial features what TAG Heuer cheap replica watch calls a “horizontal streak effect.” It has prominent hand-applied polished and facetted indexes that mark the hours, including a luminescent treatment for low-light visibility.
TAG-Heuer-Aquaracer-300M-443mm-steel-bezel-side-thumb-660xauto-29865.jpg
Water-resistance is 300 meters. The oscillating weight has Geneva stripes and is engraved “TAG Heuer — Calibre 5 — Swiss Made,” although this is a dive replica watch, so naturally the solid steel screwed-down caseback (engraved with a diving bell) is covering it up. A basic 4Hz (28,800 vph) Swiss automatic movement powers the functions and has a power reserve of 38-hours. (Ref. The replica TAG Heuer Aquaracer 300M 43 mm dive replica watch with steel bezel is presented with a matching 3-row, brushed steel bracelet. WAY2012.BA0927)
The stainless steel screwed-down crown is polished and emblazoned with the TAG Heuer logo.

tag heuer mens replica watches | tag heuer aquaracer replica watches | tag heuer 43mm replica watches | tag heuer diver replica watches